The Complete Visual System to Spot Dangerous Wiring Faults Before They Burn
Stop opening boards and boxes and second-guessing what you see — a scorched joint, a double-tapped breaker, a cable cooking in the insulation — and searching forums and videos for answers, without a system built for real electrical work.

Does This Sound Familiar?
You can fix what's in front of you — but spotting the fault that will start the fire takes more than a quick look in the box.
Is This Joint Safe Or Not?
Slight browning on a terminal, a splice wrapped in old tape, a neutral that looks tight. Without a clear reference of what correct and dangerous look like, you keep guessing instead of knowing what to remake.
Fix It Or Replace It?
Is that heat damage just cosmetic? Is the cable still safe to keep? Without stages and decision rules next to the photo, every borderline call leans on memory alone.
References Scattered Everywhere
Regulation books, YouTube videos, forum threads, photos on your phone and a manual you never open on site... nothing sitting in one visual system you can trust on the job.
Doubt That Follows You Home
Between back-to-back jobs, quotes to write and the board you weren't sure about, there's barely any headspace left for what matters: spotting the fault and fixing it with confidence.
What if every fault, sign and fix was already laid out side by side?
ELECTRICAL FAULTS VISUAL SYSTEM™
Far more than a folder of fault photos — this is a complete visual system built to help you spot bad joints, read a board in seconds, judge cable damage, find the faults that start fires and shocks, and stop searching every single week.
The 6 Modules of the System
Six visual modules in one complete electrical fault system
Connections, Splices & Terminations Fault Atlas™
- ▸ Correct and faulty joints shown side by side on real photos
- ▸ Heat damage read in four stages, from first browning to charring
- ▸ Strip length, torque and connector choice made visual
- ▸ Remake procedure for every bad joint, step by step
Panel & Consumer Unit Fault Atlas™
- ▸ Healthy board vs faulty board, compared component by component
- ▸ Double-tapped, unseated and oversized breakers marked on the photo
- ▸ Neutral and earth bar faults that hide in plain sight
- ▸ Safe opening procedure and a 10-point board checklist
Cable Damage & Overheating Atlas™
- ▸ Overheating causes shown with the damage each one leaves
- ▸ Cable heat damage graded in four stages, side by side
- ▸ Hidden damage: screws, staples, abrasion and buried joints
- ▸ Repair-or-replace decision path for every damaged cable
Earthing, Bonding & Polarity Fault System™
- ▸ Correct vs missing earth and bonding connections on real installs
- ▸ Polarity faults shown at the accessory and at the board
- ▸ Open and shared neutral symptoms traced back to the cause
- ▸ Continuity checks laid out step by step
Breakers & RCD / GFCI Fault System™
- ▸ Tripping patterns linked to the most likely fault
- ▸ Correct vs wrong protective device for each circuit
- ▸ Test button and tester results made visual
- ▸ Fault-finding sequence for circuits that keep tripping
Wet Areas, Outdoor & Hidden Hazards Atlas™
- ▸ Wet-area installations compared: safe vs dangerous
- ▸ Outdoor and garden faults shown with the weather damage they cause
- ▸ DIY wiring red flags you'll meet on real jobs
- ▸ Where to look for the hidden fault behind the symptom
- ✅ Save hours every week — open the system, find the plate, compare immediately
- ✅ Spot dangerous joints, boards and cables with confidence, backed by real photos
- ✅ Decide faster what to tighten, remake or replace
- ✅ Explain every fault to your customer with clear, visual proof
LOOK INSIDE
A real look at some plates inside. This is just a sample — the complete system includes 6 full visual modules, real fault photos, damage stages and correct-vs-fault comparisons.






🎁 5 Premium Bonuses Included
Built to support every module — and to cover what most electrical references leave out.
Included at no extra cost — FREE with your systemFault-Finding Flowcharts™
Find the fault faster every time — step-by-step flowcharts for tripping circuits, dead sockets, flickering lights and warm accessories, so you always know what to check next.
Cable Sizing & Breaker Quick Reference™
The cable sizes, protective device ratings and derating factors you check on every job, gathered on a few printable pages so you never have to hunt through a book on site again.
Safe Isolation & Lockout Checklist™
Isolate, lock off, prove dead and restore — every step of safe isolation broken down one by one, with the mistakes that cause shocks and how to avoid them.
Customer Fault Report Templates™
Show customers exactly what you found and why it needs fixing — ready-to-use report templates and plain-English explanations that turn a found fault into an approved job.
Electrical Fault Case Challenges™
Real-world call-outs with symptoms and photos to diagnose on your own, with the full reasoning and the fix on the next page. Test how you actually think.
This price disappears when the timer hits zero:
After that, the price goes back up to $97 and won't come back down.
Get instant access today only.
ELECTRICAL FAULTS VISUAL SYSTEM™
- ✅ 6 Complete Modules
- ✅ 5 Premium Bonuses
- ✅ Correct vs Fault Photos
- ✅ Instant Digital Access
- ✅ Joints, Boards & Cables
- ✅ Lifetime Access
Instant access: the Electrical Faults Visual System™ and its 5 bonuses arrive by email as PDFs. One-time payment, no subscription or hidden fees.
7-Day Money-Back Guarantee
Explore the complete system for seven full days. Open every module, use the plates on real jobs, and see how much searching it saves you. If you're not completely satisfied, we'll refund 100% of your purchase.
No questions asked.
Everything You Get Today
6 complete visual modules and 5 premium bonuses — one organised system, ready the moment you check out.

Frequently Asked Questions
It's a 100% digital system. You get instant access to every module and bonus right after checkout, delivered straight to your email.
Licensed electricians and contractors, apprentices, maintenance and facilities technicians, electrical inspectors and anyone who works on real installations.
Neither. It's a visual reference system you use alongside your own training and work. It organises what you look at — it doesn't replace formal training or your local wiring rules.
Forever. You pay once and it's yours — open it whenever you need it, with no fees and no subscription.
Real job-site style photos, labelled and paired: the correct installation next to the faulty one, so you learn to see the danger at a glance.
That's exactly how it's built. Plates are grouped by fault and by location so you can reach the right comparison on your phone in seconds.
Very. The connections module and the case challenges are built for exactly that stage, and the rest of the system grows with you as you take on more.
No. It's a visual reference to support your inspection. Testing, certification and every decision on site remain yours, following the wiring rules where you work.
Immediately. Access is delivered instantly by email as soon as your purchase is complete.
Yes — you're covered by a 7-day, no-questions-asked money-back guarantee.
One Last Chance.
Every job deserves a safe finish.
Your customers deserve more than a call made from memory. Stop guessing at scorched joints, digging through videos and forum threads, and rebuilding your references every single week.
Instead, work with confidence using a complete visual system where every fault, sign and fix is already paired, labelled and organised. Spend less time searching. Spend more time fixing.
ELECTRICAL FAULTS VISUAL SYSTEM™
$27

Immediate Access • Delivered Instantly by Email